4V220 Pilot Operated Pneumatic Solenoid Valves
|Payment Type:||L/C,T/T,Western Union|
|Terms of Trade:||FOB,EXW|
|Min. Order:||3 Set/Sets|
|Delivery Time:||8 Days|
|Packaging:||Box Carton Pallet|
|Productivity:||25 thousand sets per week|
|Place of Origin:||NINGBO|
|Supply Ability:||100000 sets per month|
Model No.: 4V220-08
4V220 Pilot Operated Pneumatic Solenoid Valves
The pneumatic system is taken as an example to illustrate the application of the solenoid valve in industrial control. The so-called pneumatic system is a gas-based control system. In pneumatic systems, the medium of this energy is usually air. In actual use, the volume of air in the atmosphere is usually compressed to increase its pressure. Compressed air works primarily by acting on the piston or blade.In pneumatic systems, the role of the solenoid valve is to adjust the various states of the compressed air in the control system according to the requirements of the control. The pneumatic system also needs the cooperation of other components, including the power components, actuators, switches, display devices and other auxiliary devices. device. The power components include various Compressors, and the actuators include various cylinders. These are all indispensable parts of a pneumatic system. The valve body is an important device for the control algorithm to be realized.
Model 4V210-06 4V220-06 4V230C-06 4V230E-06 4V230P-06 4V210-08 4V220-08 4V230C-08 4V230E-08 4V230P-08 Pipe Size G 1/8''
Operating Pressure 0.1-0.75mpa
Voltage Range -15%~15%
Energy Consumpion AC:4.5VA DC:3W
Highest Action Frequency 300 times per minute
Shortest Excitation Time 0.05 second
Combined usage of Pneumatic solenoid valves:
Filters for 4V220-08:
Types of 4V series:
The check valve allows compressed air to enter the gas tank from the Compressor. When the compressor is closed, the compressed air is prevented from flowing in the opposite direction. When the pressure in the gas storage tank exceeds the allowable limit, the compressed air can be discharged; the directional control valve passes. The two ports of the cylinder are alternately pressurized and exhausted to control the direction of motion; the speed regulating valve can easily realize the stepless speed regulation of the actuator.The solenoid valve can be applied not only to pneumatic systems, but also to the same or similar applications in hydraulic systems and water pressure systems, such as low-power, non-oil-filled small electromagnetic reversing valves. Seals do not need to be supplied with oil. The gas does not pollute the environment and can be used in food, medicine, electronics and other industries.
Now, solenoid valve technology combined with control technology, computer technology, and electronic technology has been able to perform a variety of complex controls. For example, the solenoid valve can be applied in the field of intelligent control and applied in wireless control technology. Because the solenoid valve can be controlled by electromagnetic, it can interface well with various electronic systems, which is one of the main reasons for its wide application.Solenoid valves have been widely used in various fields of production. With the improvement of electromagnetic control technology and manufacturing processes, solenoid valves can achieve more sophisticated control, and play a role in realizing different pneumatic systems and hydraulic systems.
Daily inspection problem
- Is the electromagnet case temperature too high?
- Whether the spool works normally when the electromagnet is operating.
- Whether the solenoid valve is leaking. The internal leakage of the solenoid valve can be checked by the cylinder stroke to the end. Check the valve outlet for leaks.
- Is the fastening bolt and pipe joint loose?
- Is the voltage normal and the wires damaged?
- Whether the seal is damaged, the spool has no sludge, dust
- Check if the exhaust port is wet by oil, or if the exhaust will leave oil mist on the white paper to determine if the lubrication is normal.
Welcome to visit us!
NINGBO BRANDO HARDWARE CO.,LTD
BRANDO is one of leading manufacturers of solenoids, armature assembly, and solenoid valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.
BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.
BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid Valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.
BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.
Quick review of BRANDO products:
- Company Name: NINGBO BRANDO HARDWARE CO.,LTD
- Representative: Lu Jin Jun
- Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
- Capital (Million US $): 1000,000RMB
- Year Established: 2008
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 10
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: Ningbo
- Contact Person: Mr. Brandon Bao
- Tel: 86-0574-83879820
Premium Related Products